idp SMART-51D - Figure 52 Laminating

33
Partial : Partial print mode. It is printed
partially for the print area only. Printing
speed can be faster than standard mode.
Color Sense : Set print image’s color
sense.
Dither : There are 3 possible selections,
Threshold, Random, and Diffusion Dither.
It is performed with K and KO ribbon only.
(Please select “Diffusion Dither” for high
quality.)
Ribbon Save :
K ribbon Split : You can set the both
sides (Front:YMCO, Back:K) to save
color ribbon(YMCKO, HYMCKO,
BYMCKO). It is only activated while
printing both sides option is set.
(5) Laminating
This tap will be shown only when SMART-
51L printer is connected to PC.
To set Laminator printing options.
Do Laminating : You can select
laminating or not
Laminator Side : You can select not use,
top side, bottom side and both sides
printing
Overlay : You can select whether overlay
prints or not.
Default setting is no overlay when
laminating and we recommend to use the
default value.
Figure 52 Laminating