3D sensor
54
13.3 Error codes
By default the error codes will not be provided by the device. The p command can activate their provision
(→ 13.2.4).
Error code ID Description
100000001 Maximum number of connections exceeded
110001001 Boot timeout
110001002 Fatal software error
110001003 Unknown hardware
110001006 Trigger overrun
110002000 Short circuit on Ready for Trigger
110002001 Short circuit on OUT1
110002002 Short circuit on OUT2
110002003 Reverse feeding
110003000 Vled overvoltage
110003001 Vled undervoltage
110003002 Vmod overvoltage
110003003 Vmod undervoltage
110003004 Mainboard overvoltage
110003005 Mainboard undervoltage
110003006 Supply overvoltage
110003007 Supply undervoltage
110003008 VFEMon alarm
110003009 PMIC supply alarm
110004000 Illumination overtemperature
To Next Page
Loading...
