Chapter 4 Installing Software & Clearing Memory
5. Select an option from the maintenance menu:
l Factory Reset (UMR)—This option enables users to re-format the NVRAM
(configurations/settings data) on the machine, returning it to factory settings.
l Wipe System—This option enables users to completely wipe the storage device (NVRAM
and software). Software installation is required after performing the Wipe System
function in order to make the terminal functional.
l Delete items—This option could appear if the option to update components is enabled in
the market. The system will display the option of deleting a component, like a game, that
needs to be removed from the machine.
l Exit—Exit from the Maintenance Menu.
6. Power OFF the terminal, and remove the Master Reset Dongle from the Brain Box and the
CFInit USB Key from the Cabinet Controller Board.
7. If the Wipe System procedure was performed, re-install the software on the machine.
8. Power ON the terminal.
86 Cobalt™ 27
To Next Page
Loading...
