2
HTM-1505R/HTM-1505CS L
(10) A lot of test signals incorpo.rated
A lot of test signals convenient for aqjustment of monitor-Cross
hatch, Flat field (50%), Window (100%), Character, and
Stepped waves with pluge signal etc.- are incorporated.
Moreover, l080i, 1035i and 720p can be selected at HDTV mode,
and test signals of each fonnat of 525, 625 can be selected at SDTV
mode on a menu.
(11) Various markers incorporated
Display of 4:3 markers is possible at 16:9 display mode.
In addition, 80%, 88%, 90%, 93%, I 00% and many other markers
are displayed for the respective 4:3/16:9 aspects at NTSC mode.
(12) Shadow function
As the function of displaying an image area of 4:3 at the time of
16:9 aspect picture and shadowing other picture portion (the
contrast of shadow portion can be set to 0% or 40%) is incorporated,
it is possible to display an picture of 4:3 immediately while
monitoring an picture of 16:9.
Shadow ON/OFF can be remotely operated, so that quick
switching is possible.
(13) Degauss timer
It is possible to set the operation of auto degauss designed to
automatically operate about 4 seconds after tuming on the monitor
to the intended time (0 to 4.5 seconds at intervals of 0.5 second)
with a timer.
This minimizes a nish cu!l'ent that flows when turning on the
system using mru1y monitors at the srune time.
(14) Design and structure
for easy maintenance and expandability
Signal conditioning module is of a plug-in type (including optional
modules) that is easily detachable from the reru· side without
removing the cover for ease of maintenance.
In addition to the DKM-501 B multi-SDI module (standru·d equip-
ment) ru1d analog component signal (YPbPr), it is possible to add
an optional module to expand the function.
HTM-1505R: 3 slots
· HTM-1505CS: 2 slots
·. J I i
Ill ·11•n::rm
1]
ER
(15) High-perfonnance infine gun CRT
A high-perfonnance inline-gun type CRT with 0.27mm dot mask
pitch is employed to assure high definition and minimize the
reflection ofoutdoor daylight etc.
Fwthennore, doming (shift of beam due to the1mal deformation) of
the shadow mask of CRT, which will occur when brightness is
increased, has been greatly improved.
(16) Contrast correction for each screen size
In order to prevent a brightness change that will occur when the
current density of the electron gun increases due to the contraction
of the image field like a normal/under screen or screens of 4:3 and
16:9. contrast conection is cruTied out so that brightness may always
be constant in each screen size.
(17) HD 4:3 scanning
A function of enlarging the 4:3 area picture alone to the whole
picture frrune (aspect ratio 4:3) at the time of HDTV is provided to
monitor the picture in real time when down-converting to the 4:3 of
SDTV for HDTV recording.
(18) High-perfonnance
high-voltage regulation circuit
As a regulation circuit that controls pulses per scanning line is used
in the high-voltage circuit, assuring quick response, minimizing
screen distortion and realizing very stable picture.
(19) Auto set-up function
When an auto set-up probe ASP-80 [option] is used, the factory
default color temperature can be automatically controlled.
Fu1thermore, when operator's original color temperature is set on the
monitrn; two or more monitors can also be controlled automatically
to the srune color temperature.
(20) Improved space factor !HTM-1505CS modelj
The front side ofHTM-1505CS model has been made small about
20% by removing the control panel from HTM-1505R model.
When installing on a control table or monitor rack, space factor
improves, contributing largely to the system design.
To Next Page
Loading...
