u Select Use default login and bypass the BaseSpace login screen to set the registered user name and
password as the default login. This setting bypasses the BaseSpace screen during run setup.
6 Select Send instrument health information to Illumina to enable the Illuminia Proactive monitoring service.
The name of the setting in the software interface might be different from the name in this guide,
depending on the version of NCS in use.
With this setting turned on, instrument performance data are sent to Illumina. This data helps Illumina
troubleshoot more easily and detect potential failures, enabling proactive maintenance and maximizing
instrument uptime. For more information on the benefits of this service, see
Illumina Proactive Technical
Note (document # 1000000052503)
.
This service:
u Does not send sequencing data.
u Requires that the instrument be connected to a network with internet access.
u Requires that the instrument be connected to BaseSpace Sequence Hub.
NOTE
This option is not available for BaseSpace Onsite Sequence Hub.
u Is turned on by default. To opt out of this service, disable the Send instrument health information to
Illumina setting.
7 Select Save.
Document # 15046563 v04
For Research Use Only. Not for use in diagnostic procedures.
37
NextSeq 500 System Guide
To Next Page
Loading...
