Page 26 Setup Manual
B.9 Maintenance
Important: While cleaning the scanner, ensure that no liquids will penetrate into the
device housing.
B.9.1 Touchscreen
The touchscreen can be cleaned with a dry micro fiber cloth. Before cleaning it is
recommended to turn the scanner into standby mode.
B.9.2 Surfaces
Use a soft, dampened cloth to clean the housing of the scanner. Recommended is a micro
fiber cloth.
B.9.3 Glass plate
Important: Do not use any cleanser with solvents to clean the glass plate!
The glass plate of the WideTEK 25-600 has a special non-reflective surface coating.
Clean the glass plate with an appropriate glass cleaner and use a soft cloth.
Recommended is a micro fiber cloth.
After cleaning dry the glass plate with a soft cloth.
B.10 Repair
Note: There are not any parts of the WideTEK 25-600 scanner which can be
repaired by the user.
All repairs should be done only by a trained technician.
To Next Page
Loading...
Need help?
General
