Image Access WideTEK 25-600 Setup Manual

Setup Manual Page 75
D.5.1.2 Brightness Correction
The brightness correction function does not perform any measurements; it only allows
setting a correction factor for the brightness. The interval of the correction factor is ± 2 dB.
Picture 55: Brightness Correction
Click on the selection arrow.
The list of the available values will be displayed.
Click at the desired correction factor. The correction factor will be effective immediately.

Image Access WideTEK 25-600 Specifications

General

Brand	Image Access
Model	WideTEK 25-600
Category	Scanner
Language	English