Setup Manual Page 5
About this Manual
Setup Manual
The Setup and Assembly Manual is written for technical staff with some basic
mechanical as well as software skills. Many resellers will offer on-site installation;
therefore, large parts or all of the setup manual might not be of interest to the reader. The
access level at which the setup and adjustment processes are performed is called “Power
user”. This “Power user” level is password protected from access by the normal operator.
All information about the normal operation and behavior of this device is found in the
Operation Manual.
All available manuals for this device can be downloaded from our customer service portal
at http://portal.imageaccess.de
. Be sure to always check for the latest versions of these
manuals.
This manual is divided into the sections A to F.
Section A contains the safety notes and the safety precautions. These safety
precautions must be followed carefully to avoid injury to the user while
working with the scanner.
Section B describes the scanner hardware and the first steps to take after the device
has been delivered.
Section C describes the setup and the adjustments which can be executed with the
touchscreen.
Section D describes the content and the functions of the Poweruser setup menu. A
wide variety of parameters of the scanner can be set and modified in this
level. It includes information about the firmware update procedure.
Section E contains information about troubleshooting and the lists of error codes and
warnings.
Section F shows all technical data and necessary declarations.
To Next Page
Loading...
Need help?
General
