What to do if IMT Construction Equipment crane functions don't work?
If the crane functions, such as boom down, extension out, and winch up, are not working, it may be due to a two-blocking or overload condition. To resolve this, winch down to relieve the two-block condition. Alternatively, boom up, extend in, or winch down to relieve the overload condition.
What to do if my IMT Construction Equipment radio remote does not work?
If the radio remote isn't functioning, it could be due to the emergency stop button being pushed in or a dead remote battery. Try pulling out the emergency stop button. If that doesn't work, replace the battery with a fully charged one.
Why is my IMT Construction Equipment tethered remote not working?
If the tethered remote isn't working, several factors could be the cause. First, ensure the “Power” toggle switch is switched to “Crane”. Also, verify the tether is securely plugged into the connection in the control cabinet. If the issue persists, the tethered control might be broken; in this case, use the buttons on the valve bank to manually stow the crane.
General| Brand | IMT |
|---|---|
| Model | 1015 |
| Category | Construction Equipment |
| Language | English |
To Next Page
