Inficon XL3000flexRC User Manual

INFICON Description | 4
XL3000flex-Operating-instructions-jina83en1-07-(2105) 13 / 108
4.2 Operation mode "Sniffing"
The XL3000flex has been developed exclusively for the "sniffing" mode. For operating
you need a sniffer line SL3000XL. It is available in various lengths, see "Scope of
delivery and additional equipment".
The sniffer line SL3000XL is connected to the connection provided on the front of the
device, see "Device setup [}14]".
Sniffer line SL3000XL
SL3000XL
Detection limit < 2 x 10
-7
mbar l/s
Gas flow (low flow / high flow) (300 sccm / 3000 sccm)
Available lengths 3 / 5 / 10 / 15 m
Cable sleeve Plastic
Good-Bad-DIsplay YES
ZERO via button YES
Connection on the device via a separate sleeve on
the front of the device
Display with measurement view YES
Acknowledge faults via buttons on the sniffer probe YES
End standby via a button on the sniffer probe YES
Acknowledge calibration via a button on the sniffer
probe
YES

Inficon XL3000flexRC Specifications

General

Brand	Inficon
Model	XL3000flexRC
Category	Security Sensors
Language	English