Inficon XL3000flexRC - Resetting the Settings

6 | Operation INFICON
78 / 108 XL3000flex-Operating-instructions-jina83en1-07-(2105)
Loading or saving
parameters
To save and restore the parameters of the device, you can connect a USB stick to the
front of the device.
Save parameter:
• Main Menu > Functions > Data > Parameters > Save
Loading parameters:
• Main Menu > Functions > Data > Parameters > Load
6.11 Resetting the settings
Mass spectrometer
module
The settings of the mass spectrometer module can be reset to factory settings.
0
10
11
12
Load factory settings
(Not applicable for XL3000flex!)
(Not applicable for XL3000flex!)
Reset the settings for XL sniffer adapter mode
Control unit Functions > Data > Parameters > Reset > MSB settings
LD protocol Command 1161
ASCII protocol Command *RST:FACTORY
–
–
Command *RST:SL3000
Access controls
The authorization for changing parameters can be reset to factory setting.
Control unit Main Menu > Functions > Data >
Parameters > Reset > Parameter Access
Control unit
The control unit settings can be reset to factory settings.
Control unit Main Menu > Functions > Data >
Parameters > Reset > Control unit
settings