Inficon XL3000flexRC - Automatic Switch-Off of the Touchscreen; Changing the Display Brightness; Show Setpoint; Assigning Favorite Buttons

6 | Operation INFICON
44 / 108 XL3000flex-Operating-instructions-jina83en1-07-(2105)
Off
On
Control unit Main menu > Settings > Set up > Control unit > Messages >
Show warnings
6.2.15 Automatic switch-off of the touchscreen
The touch screen can be switched off automatically after a specific time without any
operation to save energy.
30 s
1 min
2 min
5 min
10 min
30 min
1 h
∞ (=never)
Control unit Main menu >Settings > Set up > Control unit > Energy >
Display off after
6.2.16 Changing the display brightness
Display brightness
20 ... 100%
Control unit Main menu > Display > Brightness > Display brightness
6.2.17 Show setpoint
Selection of the trigger (leak rate threshold) displayed on the touchscreen.
1
2
3
4
Control unit Main menu > Settings > Trigger > Trigger sel.
6.2.18 Assigning favorite buttons
The favorite buttons offer direct access to individual functions. They can be assigned
with access control "Supervisor" or higher by the user.
Favorite 1: Center button