Inficon XL3000flexRC - Page 68

6 | Operation INFICON
68 / 108 XL3000flex-Operating-instructions-jina83en1-07-(2105)
Deactivating the ZERO
key on the sniffer
Deactivation of the ZERO-key (ZERO-alignment) prevents that the measurement is
influenced inadvertently.
0 On
1 Off
Control unit Main Menu > Settings > Setup > Modes > Sniff > Sniffer > Button
> ZERO at startup
LD protocol Command 412
ASCII protocol Command *CONFig:BUTSniffer