InFocus IN1156 - Installing the Remote Control Battery; Operating Range with Remote Control

15
English
Installing the Remote Control Battery
1. Remove the battery holder by holding down the side
release firmly and pulling out the battery holder.
3
V
O
L
T
S
CR2025
3
V
O
L
T
S
CR2025
M
3
V
O
L
T
S
CR2025
2. Insert a CR2025 coin cell battery and align the polarity
correctly according to the marking in the battery holder.
3. Replace the battery holder.
Operating Range with Remote Control
Horizontally: ±30°
Vertically: ±20°
7m / 23 feet
Note:
- Actual operating range may slightly differ from the diagram. A weak battery can reduce the
operating range.
- When pointing the remote control directly (0 degrees angle) on the IR sensor, the distance
between the remote control and the sensor should not exceed 10 meters (~ 33 feet).