64
English
Ceiling Mount the Projector
1. To prevent damage to your projector use a manufacturer recommended mount.
2. If you wish to use a third party ceiling mount kit, please ensure the screws used to
attach a mount to the projector meet the following specifications:
• Screw type: M4 x 3
• Minimum screw length: 25mm
Note: Please note that damage resulting from incorrect installation will void the warranty.
Unit: mm
WARNING:
- If you buy a ceiling mount from another company, please be sure to use the correct screw
size. Screw size will vary depending on the thickness of the mounting plate.
- Be sure to keep at least a 10cm gap between the ceiling and the bottom of the projector.
- Avoid installing the projector near a heat source.
To Next Page
Loading...
