Infranor XtrapulsCD1-a Series User Manual

35
XtrapulsCD1-a
Chapter 4 - Connections
3.5 – XTRAPULS CD1-a-400/I DRIVE: CONNECTION DIAGRAM WITH PROTECTIONS BY "UL" FUSES
(according to the table in section 3.3 of this chapter)
IMPORTANT
The installer of the drives has to use a UL listed quick connect for ground connection (0.250 inches or 6.35 mm
wide nominal).
Field wiring terminals must use copper conductors only.
Torque value for field wiring terminals: according to the Recognized terminal block used.

Infranor XtrapulsCD1-a Series Specifications

General

Brand	Infranor
Model	XtrapulsCD1-a Series
Category	DC Drives
Language	English