User’s manual
Keypads 29
Note
What appears on the display of Air/W keypads as the flashing of the characters that indicate the
operating statuses of the partitions, is not actually true flashing but is in fact the solid negative image of
the characters themselves.
6-1-2
The Alien keypad screen
Although the functions provided by the different versions of the Alien keypads are they same,
the devices differ in screen size and the layout of the icons and buttons.
Following is the description of the Alien/S screen layout; the presence of the various elements
described depends on the activated functions and the accessed window:
Further visualizations displayed on the Alien screen depend on the section/page being
accessed by means of the buttons. The layout of such pages depends on the functions and
buttons available and how they are used (paragraph 6-7-1 Alien function keys).
POP-UP
There are also alerts which the control panel activates automatically and that appear as pop-
ups during the following events:
• Zone alarm or tamper
If any of the keypad partitions has alarm or tamper event memory, a pop-up will appear
showing:
•• an “ALARM” warning and the description of the zone which generated the alarm or
tamper signal
•• the Disarm button, to disarm all the armed partitions the code and keypad in use have
in common
•• the Stop alarms button, to deactivate the outputs activated by the alarm signal
•• Clear call queue button, to cancel the calls in the outgoing call queue
•• the Home button to access the home page directly
• Activation of the entry time
• Activation of the exit time
If an entry or exit time is activated, a pop-up will appear showing:
•• a string indicating the remaining seconds of the running entry/exit time
•• the Disarm button, to disarm all the armed partitions the code and keypad in use have
in common
•• the Scenarios button, to access the scenarios available for activation
•• the Home button to access the home page directly
• Keypad locked,icon which appears when you tap the display and the keypad is locked due
to 5 consecutive entries of an invalid code.
• Reader locked, icon which appears when you hold a key in the vicinity of a reader which
has been locked due to 5 consecutive attempts to use an invalid key.
Table 6-3: Alien - screen
A
Data and Time of the Prime control panel.
If the control panel is in Service status, this field will show the address
of the Alien and its built-in reader.
B
Keypad LED icons (Table 6-7: Keypad LEDs).
C
Temperature read by the thermometer of the Alien user interface.
D
Icon which indicates the presence of an SD card in the card slot.
After entering a valid user code, the
Logout
that appears will allow you
to close the session.
E
Section for the active functions, with buttons for access to the Alien
user interface, to its applications and to the Prime system.
The home page of the Alien/S (shown in the figure) shows the function
buttons indicated in Table 6-19: Alien keypad menu. In the Alien/G,
these buttons are shown in a section on the left and are always visible
regardless of the active function.
F
String showing the arming status of the control panel, in accordance
with the active scenario or status of the partitions.
If a partition to which the keypad belongs changes its status with
respect to what is programmed for the active scenario, or in the event
that the control panel enters maintenance mode, this string will show
the characters relating to the status of the partitions, as described in
Table 6-2: Display visualization.
G
Tapping this section on the display opens (for 3 seconds) a window containing a list of the active scenarios. If required by programming (paragraph
6-6 Operations from LCD keypads), it may request entry of a valid code.
H
System information icons, as described in Table 6-4: Information icons.
I
If you are inside a section, this field will show the following buttons which may cover the information buttons:
• Prev. level This key allows you to step back to the previously active function.
• Home page Button, present only on the Alien/S model, which allows you to go directly to the home page.
SCENARIO 001
CA DB
E
F
HG
H
I
SCENARIOS COMMANDS INTRUSION MENU
SETTINGS SYSTEM APPS CLIMATE
01/01/2019 6:23
To Next Page
Loading...
