User’s manual
How to use the PrimeLAN 57
9-3-1
Alarm management
In the event of alarm and tamper, the user can intervene by deleting the alarm and tamper
memories.
To do this you must first access the “Intrusion” section, then the “Partitions” section. This
section contains the list of partitions the user can control, the SET button opens a window
containing a list of commands for the partition.
The RESET button deletes the alarm memory and, if allowed, also tamper memory.
9-3-2
Arming commands and scenarios
The AlienMobile allows users to activate the programmed scenarios and also set up the arming
mode of the partitions they control (have access to):
• Access “Scenarios” section This section provides a list of the scenarios which can be
activated by means of the ACTIVATE button.
The description of the current scenario is displayed on the bar on the bottom left of the
screen.
• First access “Intrusion” the section and then the “Partitions” section.
This section contains the list of partitions the user can control, the SET button opens a
window containing a list of commands for the partition.
The button indicating the active arming mode will be highlighted by a different colour to the
other buttons.
9-3-3
Viewing and activations
Through the PrimeLAN web browser it is possible to view the status of various elements of the
Prime system and to change their activations by means of the available buttons.
KEYPAD
Section for remote access to a keypad.
Refer to paragraph 9-3-5 Remote keypads.
MAPS
Accesses the system through the graphic maps.
Refer to Chapter 10 , Graphic maps.
Table 9-2: Menu via web server
Icon/key Section
Table 9-3: Activations via web
Button Function
SET
opens a window with the buttons for setting the arming mode
AWAY
Arms the selected partition in Away mode
STAY
Arms the selected partition in Stay mode
INSTANT
Arms the selected partition in Instant mode
DISARM
Disarms the selected partition
To Next Page
Loading...
