Need help?Do you have a question about the innomar SES smart and is the answer not in the manual?
General| Brand | innomar |
|---|---|
| Model | SES smart |
| Category | Measuring Instruments |
| Language | English |
Essential safety guidelines for operating the Innomar SBP system.
Details the components included in the Innomar SBP delivery.
Provides a general description of the Innomar SBP system components.
Covers general guidelines for handling and installing the SBP transducer.
Instructions for correctly installing the SBP topside unit.
Identifies and explains the connectors and controls on the SBP front panel.
Specific instructions for installing hull-mounted transducers.
Guides users through setting up Ethernet and WiFi connections for system operation.
Instructions for installing or updating the SESWIN software.
Steps to launch and initiate the SESWIN application.
Overview of the main SESWIN software interface elements.
Explains the different menu bars for system configuration and operation.
Details the information displayed in the SESWIN status bar.
Covers survey-specific parameters like transmit, record, range, and gain settings.
Guide to configuring system parameters before a survey.
Configuration for integrating GNSS navigation data.
Setup for motion sensor data for heave compensation.
Configuring the system for internal trigger operation.
Setting up synchronization with external trigger devices.
Explanation of advanced ping modes for optimized ping rates.
Details the 1-PPS signal input for precise time synchronization.
Advice on minimizing engine noise and optimal transducer placement.
Instructions for setting transducer depth and water sound velocity.
Configuring the system to receive and process navigation data.
Steps for installing and configuring motion sensors for data quality.
Strategies for preventing interference between acoustic systems.
Guide for synchronizing with a sparker system.
How to stream data to HYPACK® survey software.
Procedure for resetting SESWIN system settings to default.
Guidelines for handling and maintaining the system hardware.
Explains common error messages during SESWIN software startup.
Steps to troubleshoot issues with motion or position sensors.
Addresses common problems where SESWIN functions fail.
Solutions for issues like no seafloor echo or weak signals.
Instructions for updating the system's firmware.
Introduction to the SES NetViewer tool for remote monitoring.
Step-by-step guide for converting data files using SESCONVERT.
Configuration options for SEG-Y data conversion and processing.
Introduction to the ISE software for data processing.
Guidance on planning survey routes and preparing for data collection.
Procedures for setting up the system aboard the survey vessel.
Core process of collecting data with the SBP system.
Steps for ensuring data quality using the ISE software.
Instructions for exporting data into SEG-Y format.
Addresses common problems related to system performance and data display.
Frequently asked questions about trigger and synchronization settings.
Answers to common queries regarding motion sensor usage and compensation.
Key technical specifications for the SES smart model.
Details on the topside unit and transducer hardware.
Overview of SES, RAW, and SES3 data formats and their characteristics.
Checklist for preparing the system before starting a survey.
Guide to essential settings for optimal data acquisition.
To Next Page