innomar SES smart - Page 5

User’s Manual Innomar SES Parametric Sub-bottom Profilers 5
Innomar Technologie GmbH (2020-09) 5
Document History
2020-09
 New software versions (SESWIN 2.2.3.9, SES Convert 2.3.3.0)
 New: “Zoom” tab for zoomed echo print (section 4.3)
 New: Data file size overview (section 12.1.6)
 1-PPS time sync pulse updated (section 5.5)
 Motion sensor formats updated (appendix A.14)
 Procedures and screen shots for Windows XP removed
 Section on transducer installation (2.2) split into pole-mount and hull-mount
2019-06
 New software versions (SESWIN 2.2.3.4, SES Convert 2.3.2.5)
 New trigger options (section 5)
 1-PPS time sync pulse
 WiFi setup “smart” model (section 3)
 Power supply requirements “smart” model
 Typos corrected section 6.3
 Improved description Roll/Pitch Offset (section 4.11.13)
 New: 24-bit versions for “medium-100” models (section 4.2.3)
 New: FAQ (section 12)
 New: user feedback form (appendix A.16)
2018-02
 New software versions (SESWIN 2.2.2.2, SES Convert 2.3.1.9)
 New “smart” model added
 Description of “medium-100”, “light-plus” and “standard-plus” models included
 Description of “compact”, “light” and “standard” models updated
 Transducer drawings included / updated
 New sections on survey/processing workflow, data formats and remote-control
2016-02
 New software versions (SESWIN 2.2.0.9, SES Convert 2.3.0.7)
 New section on bar-check procedure
2015-08
 Manuals for shallow-water models “compact” and “light / standard” merged
 New software versions (SESWIN 2.2.0.8, SES Convert 2.3.0.5)