Inovance IS 300 Series - Page 75

Appendix IS300 Series Servo Drive User Manual
- 74 -
Function
Code
Name Setting Range Min. Unit Default Property
A3-22
Setting of max.
output speed in
pressure control
0.0%–100.0% 0.1% 10.0% ☆
A3-23
Setting of min.
output speed in
pressure control
0.0%–100.0% 0.1% 60.0% ☆
A3-24
Output delay time
in pressure control
0.000–10.000s 0.001s 0.100s ☆
A3-25
Reference oil
pressure S filter
time
0.000–10.000s 0.001s 0.030s ☆
A3-26 to
A3-31
Reserved - - - ☆
A3-32 Min. slave input 0.0%–A3-34 0.1% 0.0% ☆
A3-33
Min. slave input
frequency
-100.0%–100.0% 0.1% 0.0% ☆
A3-34
Medium slave
input
A3-32–A3-36 0.1% 0.0% ☆
A3-35
Medium slave
input frequency
-100.0%–100.0% 0.1% 0.0% ☆
A3-36 Max. slave input A3-34–100.0% 0.1% 100.0% ☆
A3-37
Max. slave input
frequency
-100.0%–100.0% 0.1% 100.0% ☆
Group A4
A4-00
Rotational sped
filter time
0–5.000s 0.001s 0.005s
A4-01 Current filter time 0–5.000s 0.001s 0.010s
A4-02 Reserved - - - -
A4-03
Overshoot
restraining factor 1
20–500 1 100
A4-04
Overshoot
restraining factor 2
20–500 1 100
Group F0: Basic Functions
F0-00 Model display
1: G type (heavy load)
2: Reserved
1
Model
dependent
●
F0-01 Control mode
0: Reserved
1: Speed sensor vector
conrol (VC)
2: V/F control
1 1 ★