IS300 Series Servo Drive User Manual Appendix
- 83 -
Function
Code
Name Setting Range Min. Unit Default Property
F5-04 to
F5-09
Reserved - - - ☆
F5-10
AO1 output
selection
0: Running frequency
1: Set frequency
2: Output current
3: Output torque
4: Output power
5: Output voltage
6: Reserved
7: AI1
8: AI2
9: AI3
10: Feedback frequency
11: Feedback pressure
12-16: Reserved
1 10 ☆
F5-11
AO2 output
selection
11 ☆
F5-12,
F5-13
Reserved - - - ☆
F5-14
AO1 offset
coefficient
-100.0%–100.0% 0.1% 0.0% ☆
F5-15 AO1 gain -10.00–10.00 0.01 1.00 ☆
F5-16
AO2 offset
coefficient
-100.0%–100.0% 0.1% 0.0% ☆
F5-17 AO2 gain -10.00–10.00 0.01 1.00 ☆
F5-18 to
F5-22
Reserved - - - ☆
Group F6: Start/Stop Control Parameters
F6-00 Startup mode
0: Direct start
1: Rotation speed tracking
restart
1 0 ☆
F6-01
Rotation speed
tracking mode
0: From stop frequency
1: From zero speed
2: From maximum
frequency
1 0 ☆
F6-02
Rotation speed
tracking speed
1–100 1 20 ☆
F6-03 Startup frequency 0.00–10.00 Hz 0.01 Hz 0.00 Hz ★
F6-04
Startup frequency
holding time
0.0s–36.0s 0.1s 0.0s ★
F6-05
Startup braking
current
0%–100% 1% 0% ★
F6-06
Startup braking
time
0.0s–36.0s 0.1s 0.0s ★
To Next Page
Loading...