Mechanical Installation (T13 Models)
‑102‑
6 Mechanical Installation (T13 Models)
6.1 Installation Method
T13 models are cabinet‑type AC drives that should be vertically mounted on the floor.
Multiple cabinets can be installed in parallel.
6.2 Installation Precautions
● Reserve sufficient clearance for heat dissipation, including the heat dissipation of
other devices around the AC drive.
● Cover the top of the AC drive with cloth or paper during installation to prevent
metal shavings, oil, and water from entering during drilling. Foreign objects
entering may cause malfunction of the AC drive. Remove the cloth or paper after
the installation is completed. Failure to comply may degrade ventilation and result
in unexpected heat.
● Tighten all screws using the specified torque. Failure to comply may result in
electric shock or fire.
● Keep combustible and explosive materials away from the AC drive.
6.3 Requirements on Ground Flatness
1. Place the AC drive on a flat and sturdy mounting base able to bear the weight of the
AC drive
2. Ensure the normal use of the door lock when opening and closing the cabinet door.
3. When installing cabinets in parallel, ensure that there is no gap between the
cabinets and the floor. For any inevitable gap (as shown by ① in the following
figure), use a pad (as shown by ② in the following figure) to level the cabinet, and
use proper fillings (for example, fireproof mud) to fill the gap.
To Next Page
Loading...
