Unpacking and Transportation
‑46‑
3 Unpacking and Transportation
3.1 Storage
● Store the AC drive in a clean and dry space, with an ambient temperature ranging
from –20℃ to +60℃ and a temperature change rate less than 1℃/min.
● For long time storage, cover the AC drive or take other appropriate measures to
keep it from contamination and environmental influences.
● For storage, pack the AC drive with the original packing box provided by Inovance.
● Avoid exposing the AC drive to moisture, high temperature, or outdoor direct
sunlight for an extended period.
● To avoid degradation of electrolytic capacitor during long‑term storage, energize
the AC drive once every six months, each time lasting at least 5 hours. Use a
regulator to increase the input voltage gradually to the rated value. For any doubt,
contact Inovance.
3.2 Transportation Before Unpacking
T1 to T12 models
Precautions for transportation of T1 to T12 models:
● T1 to T6 models are small and light and therefore can be handled manually. T7 to
T12 models, however, must be transported with an appropriate lifting tool.
● Where applicable, fasten the AC drive onto a wooden pallet for transport by a
forklift. Where applicable, fasten the AC drive onto a pallet before being lifted by a
crane, as shown in the following figure.
To Next Page
Loading...
