Inovance MD500-PLUS Series - Required Accessories; Through-Hole Mounting Bracket

Installation Preparation
‑24‑
Model Recommended Fastener Tools
T12
M16 bolt, spring washer, and
flat washer
Socket wrench (24 mm) and
socket wrench extension bar
(250 mm)
T13
M12 bolt, spring washer, and
flat washer
Socket wrench (24 mm) and
socket wrench extension bar
(250 mm)
1.4 Required Accessories
1.4.1 Through-Hole Mounting Bracket
The through‑hole mounting bracket is optional and can be purchased as needed.
Applicable models
Table 1–7 Models of through‑hole mounting brackets
Models of Through‑hole Mounting
Brackets
Structure
MD500‑AZJ‑A1T1 T1
MD500‑AZJ‑A1T2 T2
MD500‑AZJ‑A1T3 T3
MD500‑AZJ‑A1T4 T4
MD500‑AZJ‑A1T5 T5
MD500‑AZJ‑A1T6 T6
MD500‑AZJ‑A1T7 T7
MD500‑AZJ‑A1T8 T8
MD500‑AZJ‑A1T9 T9