Unpacking Inspection
‑75‑
Figure 3‑13 Lifting the AC drive
2. Hook the lifting rope to the lifting lugs diagonally placed at the top of the AC drive,
slowly place the AC drive upright, and install it to the cabinet.
Avoid applying stress on any side of the AC drive or placing it on an inclined surface. The AC
drive is large and heavy (close to 200 kg). If the inclination angle exceeds 5°, it may topple.
T13 models
1. Before installation, remove the fixing screws from the four corners of the
transportation pallet and the cabinet, and remove the pallet.
To Next Page
Loading...
