Modbus Communication
‑39‑
3. Select AM600-CPU1608TP/TN, set Language to ""SSttrruuccttuurreedd TTeexxtt ((SSTT))"", and click
""OOKK"".
4. Click ""LLooccaallBBuuss CCoonnffiigg"", and click the CPU module. Since RS485 of COM0 is
connected to the RS485 terminal of MD520 during the hardware connection step,
select the Modbus master of COM0.
5. Click ""MMOODDBBUUSS__CCOOMM00"" on the left, and set the baud rate, parity, and stop bit
according to the settings of FD‑01.
To Next Page
Loading...
