Option Selection
‑107‑
4.2 Mounting Accessories
4.2.1 Bottom Mounting Bracket
T10 to T12 models come with a bottom mounting bracket. When the AC drive is
installed in a cabinet, the bottom mounting bracket is required for fixing the AC drive
to the cabinet rack base. The dimensions of bottom mounting bracket vary with the
power rating, weight, and size of the AC drive, as shown in the following figures.
The bracket delivered with the AC drive is applicable to cabinets 600 mm in depth. If
you need a bracket for a cabinet 800 mm in depth, contact Inovance.
Figure 4‑1 Dimensions of bottom mounting bracket for T10 models
To Next Page
Loading...
