Inovance MD580 Series - Through-Hole Mounting (T1 to T9)

Mechanical Design
‑42‑
2.5.2 Through-hole Mounting (T1 to T9)
Note
The through‑hole mounting bracket is an option.
1. Fix the mounting brackets to both sides of the AC drive.
Figure 2‑15 Installing the mounting brackets to the AC drive (T1 to T9 models)
2. The following figure shows the AC drive with brackets mounted.
Figure 2‑16 AC drive with brackets mounted (T1 to T9 models)
3. Fix the AC drive with the brackets to the back of the control cabinet.