Mechanical Design
‑36‑
T10 to T12 models
Figure 2‑8 Clearance for installation (T10 to T12 models)
Table 2–8 Installation clearance
Power Rating
Clearance (mm)
220 kW to 450
kW
A2 ≥ 10 B2 ≥ 250 C2 ≥ 20 D2 ≥ 20
Note
T10 to T12 models can only be installed individually inside the cabinet. For installation
needs, contact Inovance.
2.4 Heat Dissipation Design
When installing T10 to T12 models in a cabinet, reserve sufficient space for heat
dissipation. A self‑ventilated cabinet has no fan on the top.
To Next Page
Loading...
