Option Selection
‑104‑
4 Option Selection
4.1 List of Options
Peripheral options include braking units, function expansion cards, and external
operators, as shown in the following table. For use of each option, see the
corresponding user guide. If any optional part is required, specify it in your order.
Table 4–1 Options
Name
Option Model
Applicable AC Drive
Model
Function
Braking
compo
nent
Built‑in braking
unit
Models containing
letter "B"
‑
Standard for 0.4G/0.75P to 15G/18.5P
models and optional for 18.5G/22P to 75G/
90P models
External braking
unit
MDBUN‑60‑T
90G/110P and above.
Multiple external
braking units are
connected in
parallel.
External braking unit for 90G/110P models
and above
MDBUN‑60‑5T
MDBUN‑90‑T
MDBUN‑90‑5T
MDBUN‑200‑T
MDBUN‑200‑5T
Expansion
card
CANopen
communication
card
MD580–SI‑CAN1
Applicable to all
models
CANopen bus adapter card
Modbus RTU
communication
card
MD580–SI‑RS1
Applicable to all
models
Modbus RTU bus adapter card
PROFIBUS DP
communication
card
MD580–SI‑DP1
Applicable to all
models
PROFIBUS DP bus adapter card
PROFINET IO
communication
card
MD580–SI‑PN1
Applicable to all
models
PROFINET IO industrial Ethernet
Modbus TCP
communication
card
MD580–SI‑EM1
Applicable to all
models
MODBUS TCP industrial Ethernet
Resolver interface
card
MD38PG4
Applicable to all
models
Applicable to the resolver; excitation
frequency: 10 kHz; DB9 interface
MD38PGMD
multi‑function
encoder card
MD38PGMD
Applicable to all
models
The encoder card supports differential
input, collector input, push‑pull input, as
well as differential output and collector
output; therefore, it can be used to
connect to different encoders and
supports A/B phase input of the host
controller.
To Next Page
Loading...
Need help?
General