Mechanical Design
‑43‑
Figure 2‑17 Through‑hole mounting (T1 to T9 models)
4. The following figure shows the AC drive installed in the cabinet by the through‑hole
mounting method.
Figure 2‑18 AC drive installed in the cabinet (T1 to T9 models)
2.5.3 In-Cabinet Installation (T10 to T12)
PPrroocceedduurree
1. In the nine‑fold profile cabinet (PS cabinet), install the mounting beam for fixing
the AC drive and reserve fixed holes.
"
Figure 2–19 Top view of the cabinet for T11 to T12 models
"
on page 44
shows the
cross sectional area of the nine‑fold profile.
To Next Page
Loading...
