Inovance MD580 Series - Page 17

Product Information
‑16‑
Three-phase 380 V to 480 V
Table 1–1 Electrical specifications (three‑phase 380 V to 480 V) (T1 models)
Item
Specifications
Model: MD580‑4Txxxxx 2R1B 3R1B 3R8B 5R1B 7R2B 9B
Structure T1
Output
Power (kW) 0.75P/0.4G 1.1P/0.75G 1.5P/1.1G 2.2P/1.5G 3P/2.2G 3.7P/3G
Rated output
current (A)
2.1P/1.5G 3.1P/2.1G 3.8P/3.1G 5.1P/3.8G 7.2P/5.1G 9P/7.2G
Output voltage Three‑phase 0 V to input voltage
Max. output
frequency
599 Hz (editable through parameter setting)
Carrier frequency 0.8 kHz to 12.0 kHz (automatically adjusted based on load characteristics)
Overload capacity
P‑type AC drive: 110% rated current for 60s; G‑type AC drive: 150% rated current
for 60s
Input
Rated input current
(A)
2.5P/1.8G 3.7P/2.4G 4.6P/3.7G 6.4P/4.6G 9.1P/6.3G 11.3P/9G
Rated voltage/
frequency
Three‑phase 380 VAC to 480 VAC, 50/60 Hz
Voltage range Allowed fluctuation: –15% to +10%; actual allowed range: 323 VAC to 528 VAC
Frequency range Allowed fluctuation: ±5%; actual allowed range: 47.5 Hz to 63 Hz
Power capacity
(kVA)
2 2.8 4.1 5 6.7 9.5
Heat
dissipation
Thermal design
power (kW)
0.039 0.046 0.057 0.068 0.081 0.109
Air flow (CFM)
9 9 9 9 9 9
Overvoltage class
OVC III
Pollution degree
PD2
IP rating IP20 (open type, for IEC products)
Table 1–2 Electrical specifications (three‑phase 380 V to 480 V) (T2 to T4 models)
Item
Specifications
Model: MD580‑4Txxxxx 13B 17B 25B 32B 37B
Structure T2 T3 T4
Output
Power (kW) 5.5P/3.7G 7.5P/5.5G 11P/7.5G 15P/11G 18.5P/15G
Rated output
current (A)
13P/9G 17P/13G 25P/17G 32P/25G 37P/32G
Output voltage Three‑phase 0 V to input voltage
Max. output
frequency
599 Hz (editable through parameter setting)
Carrier frequency 0.8 kHz to 12.0 kHz (automatically adjusted based on load characteristics)
Overload capacity
P‑type AC drive: 110% rated current for 60s; G‑type AC drive: 150% rated current
for 60s