Inovance MD580 Series - Page 29

Mechanical Design
‑28‑
Figure 2‑2 Installation dimensions of T7 to T9 models
Table 2–2 Dimensions of T7 to T9 models
Structure
Mounting Hole Spacing
mm (in.)
Outline Dimensions
mm (in.)
Mounting
Hole
Diameter
mm (in.)
Weight
kg (lb)
A B H H1 W D
T7
245 (9.7) 523 (20.6) 525 (20.7) 542 (21.4) 300 (11.8) 269 (10.6) Ø10 (0.4) 35 (77.2)
T8
270 (10.6) 560 (22.1) 554 (21.8) 580 (22.9) 338 (13.3) 309.4 (12.2) Ø10 (0.4) 51.5 (113.5)
T9
320 (12.6) 890 (35.1) 874 (34.4) 915 (36.1) 400 (15.8) 314.6 (12.4) Ø10 (0.4) 85 (187.4)