5G INDOOR ROUTER FG2000e USER GUIDE 18
Overview
You can configure your FG2000e to best suit your needs, including: changing your network name
and/or passwords, checking router status and data usage, setting up a guest network, viewing all
currently connected devices, and setting device preferences.
There are multiple tools for configuring your 5G Indoor Router:
• Inseego Mobile App – Allows you to perform basic device monitoring and management. This
is the same app you used to identify a location for your FG2000e.
• Admin Web UI – Provides a local gateway to configure and manage your FG2000e. On a
device connected to your router, open any Web browser and go to http://192.168.1.1. Select
Sign In (in the top-right corner of the screen), and enter the Admin Password printed on the
bottom of the FG2000e.
• Inseego Connect – Enables you to monitor and configure an entire deployment of devices.
You can group devices together to push widespread configurations, troubleshoot individual
devices, set alarms, and run reports. Go to connect.inseego.com to sign up for a free Inseego
Connect account.
This chapter provides the configuration options available for your FG2000e devices. The
configurations shown are from the Admin Web UI, unless otherwise noted. Many of these options are
also available with Inseego Mobile App and Inseego Connect. Some configurations are available only
with Inseego Connect, and are marked as such.
To Next Page
Loading...
