5G INDOOR ROUTER FG2000e USER GUIDE 65
SIM Tab
On the Admin Web UI Home page, the SIM Status panel shows SIM status information.
Carrier: The name of the Mobile Network Operator.
ICCID: The unique ID number assigned to the SIM card.
IMSI: The International Mobile Subscriber Identity (IMSI) for your FG2000e. This is a unique
number, usually fifteen digits, that identifies a Global System for Mobile Communications (GSM)
subscriber.
MDN: The phone number of your FG2000e.
APN: The access point name for your FG2000e.
PCI: The Physical Cell ID.
RSRP: The strength of the cellular signal, measured in dBm. Higher absolute values indicate a
stronger signal, for example: -80 dBm is a stronger signal than -90 dBm.
RSRQ: Reference Signal Received Quality. A calculated value from RSRP and RSSI that provides a
measure of signal and interference.
SNR: Signal to Noise Ratio. A ratio of signal power to noise power expressed in decibels. SNR is a
positive value, and higher numbers are better.
NOTE: SIM Management settings vary depending on whether you are using the Admin Web UI or
Inseego Connect. The following sections provide information on each:
• SIM Tab (Admin Web UI)
• SIM Management (Inseego Connect)
To Next Page
Loading...
