5G INDOOR ROUTER FG2000e USER GUIDE 82
DHCP Client: Enable DHCP Client if you want the DHCP server to allocate an IP address for the
WAN. NOTE: If the DHCP Client is not enabled, you must assign a fixed IP address, netmask, and
Gateway IP below.
IP address: The IP address for the WAN.
Netmask: The mask network setting for the WAN. The default value 255.255.255.0 is standard
for small (class "C") networks.
Gateway IP: The IP address for the gateway.
Select Save changes to close the dialog box and return to the Port Configuration page.
Click Save changes to save settings.
To Next Page
Loading...
