INSTEON Hub Developer's Guide

INSTEON Hub: Developer’s Guide
Page 9 © 2013 INSTEON
Send go into Linking mode group 137.
http://172.16.1.34/0?09137=I=0
The PLM echoes and adds an 06
0264018906 (0264 linking command 01 controller and group 0x89)
Press and hold the button on the new device
02640101060253010108B6EA010195
0264010106 Left in the buffer from go into linking mode
0253 Linking completed
01 Device can be a controller (00 and FF are valid)
01 Group
08B6EA ID of device
01 Device Category (01 = Dimmer)
01 Device SubCat (01 = SwitchLinc)
95 Firmware Version of New device

INSTEON Hub Specifications

General

Product Name	INSTEON Hub
Model Number	2245-222
Connectivity	Ethernet
Communication Protocol	INSTEON
Operating Temperature	0°C to 40°C (32°F to 104°F)
Operating Humidity	85% non-condensing