INSTEON Hub Developer's Guide

INSTEON Hub: Developer’s Guide
Page iii © 2013 INSTEON
Revision History
Release Date Author Description
01-30-07 PVD Abstracted from INSTEON Developers Guide.
02-12-07 PVD Added daughter card sections.
02-14-07 PVD Released for proofreading.
03-01-07 PVD More information on the PLM, comparison to PLC.
03-27-07 PVD
Fixed bytecount in IM Command 0x62 Send INSTEON Standard or
Extended Message.
03-28-07 PVD
Added IM Command 0x58 ALL-Link Cleanup Status Report.
03-29-07 PVD
Updated explanation of IM Command 0x6F Manage ALL-Link Record.
04-02-07 PVD
Updated explanation of IM Commands 0x61 Send ALL-Link Command,
0x56 ALL-Link Cleanup Failure Report, and 0x58 ALL-Link Cleanup
Status Report.
04-06-07 PVD
IM Command 0x58 ALL-Link Cleanup Status Report also sent when IM
interrupts its own Cleanup sequence.
04-17-07 PVD
Corrected <X10 Flag> value in IM Commands 0x63 Send X10 and
0x52 X10 Received.
04-19-07 PVD Added page number subscripts to links.
09-14-07 PVD
Fixed command number typo for IM Command 0x72 RF Sleep.
10-11-07 PVD
Rewrote explanation for IM Command 0x6F Manage ALL-Link Record,
enumerated <ALL-Link Record Flags> in IM Command 0x57 ALL-Link
Record Response.
Renamed Powerline Modem as PowerLinc Modem.
10-12-07 PVD
Added PowerLinc Modem (PLM) Quick Start Guide section
1-18-08 JTL Updated Set IM command to include that if Bit 3=1, the interface will
NAK serial commands if the it is busy processing an INSTEON
command.
3-16-12 BJV Added IM commands
7-23-12 BJV Added Hub communication

INSTEON Hub Specifications

General

Product Name	INSTEON Hub
Model Number	2245-222
Connectivity	Ethernet
Communication Protocol	INSTEON
Operating Temperature	0°C to 40°C (32°F to 104°F)
Operating Humidity	85% non-condensing