134
NET/USB—Continued
This section explains how to play music files on a USB
mass storage device.
Playing Music Files on a USB Device
1
Plug your USB mass storage
device into the AV receiver’s USB
port.
2
(DTR-70.1)
Press the [NET/USB] button
repeatedly to select the USB
screen.
(DTR-80.1)
Press the [NET/USB] button
repeatedly to select the
USB(Front) or USB(Rear) screen.
The USB indicator lights up if the
AV receiver is able to read the USB
mass storage device. The USB indica-
tor flashes if the AV receiver cannot
read the USB mass storage device.
NET/USB
qwer
Enter
Receiver
1
1 / 1
USB(Front)
USB Storage
3
Use the Up and Down [q]/[w]
buttons to select a USB mass
storage device, and then press
[Enter].
A list of the device’s contents appears.
To open a folder, use the Up and Down
[q]/[w] buttons to select it, and then
press [Enter].
4
or
Use the Up and Down [q]/[w]
buttons to select a music file, and
press the [Enter] or Play [1]
button to start playback.
Playback starts and the following
screen appears.
To return to the previous menu during
playback, press the [Return] button.
To stop or pause playback, press the
Stop [2] or Pause [3] button, respec-
tively.
To select the next song, press the Next
[6] button. To select the beginning
of the current song, press the Previous
[7] button. To select the previous
song, press the Previous [7] button
twice.
To fast forward the current song, press
the [4] button. To fast reverse the
current song, press the [5] button.
USB Storage
Folder1
Folder2
01_Song_Track1
02_Song_Track2
03_Song_Track3
04_Song_Track4
05_Song_Track5
06_Song_Track6
07_Song_Track7
08_Song_Track8
2 / 5
00:10
01:12:34
Folder1
Album
Artist
02_Song_Track2
MP3 128kbps 16bit/44.1kHz
1/17