67
Basic Operations—Continued
Using the Easy macro command in the Easy macro
mode, you can sequentially operate Integra/Onkyo com-
ponents with simple commands by simply pressing one
button. These commands are user-specifiable (see
page 159) and the default actions are described below.
Press the Activities buttons to start the Easy macro com-
mand.
Once the AV receiver has entered the normal macro
mode, all of the Activities buttons will automatically
switch to the normal macro mode. In this case, pressing
the [All Off] button will set only the AV receiver to
Standby mode.
*1. Depending on the start-up time of the DVD/BD player, the AV
receiver may not activate this playback command. In this case,
press the Play [1] button on the remote controller.
*2. When [My Music] is selected, with the default settings, this will
not be performed.
*3. With some televisions, the power may not be turned off (or enter
standby).
Using Easy Macros
1
Press the [My Movie], [My TV], or
[My Music] button.
My Movie (default):
1. The TV connected to the AV
receiver is turned on.
2. The Integra/Onkyo DVD player
connected to the AV receiver is
turned on.
3. The AV receiver is turned on.
4. The input selector of the AV
receiver is set to “DVD/BD”.
5. The player starts playback.
*1
My TV (default):
1. The TV connected to the AV
receiver is turned on.
2. The cable set-top box connected to
the AV receiver is turned on.
3. The AV receiver is turned on.
4. The input selector of the AV
receiver is set to “CBL/SAT”. You
can enjoy cable TV.
Receiver
Audio
All Off,
My Movie,
My TV,
My Music
Activities
buttons
My Music (default):
1. The Integra/Onkyo CD player con-
nected to the AV receiver is turned
on.
2. The AV receiver is turned on.
3. The input selector of the AV
receiver is set to “CD”.
4. The player starts playback.
Note:
Once you start the Easy macro com-
mand, you cannot use other Activities
buttons during the execution. If you
want to operate other components half-
way, press the [All Off] to stop and
press desired Activities button.
2
Press the [All Off] button.
1. The connected component stops
and turns off.
2. The AV receiver turns off.
3. The TV connected to the AV
receiver turns off (Standby).
*2*3
To Next Page
Loading...
Need help?
General
