140
Multi Zone—Continued
Connecting Your Zone 4 Speakers Directly
to the AV receiver
This setup allows 3.2-channel playback in your main
room and 2-channel stereo playback in Zone 4, with a
different source in each room. This is called Powered
Zone 4, as the Zone 4 speakers are powered by the AV
receiver.
Hookup
• Connect your Zone 4 speakers to the AV receiver’s
SURR/ZONE 4 L/R speaker terminals.
Notes:
• With this setup, the Zone 4 volume is controlled by the
AV re c e iver.
• Powered Zone4 cannot be used if “Powered Zone2” or
“Powered Zone3” is set to “Not Act”.
Connecting Zone 4
To use this setup, you must set the “Powered Zone4”
setting to “Act” (see page 141).
LR
Main room
Zone 4
TV
AV receiver
To Next Page
Loading...
