80
Listening to the Radio—Continued
Positioning the SiriusConnect Home
Antenna
You can check the strength of the SIRIUS Satellite Radio
signal and adjust the position of the SiriusConnect Home
antenna accordingly.
Notes:
• So long as the signal strength is good, you can enjoy
SIRIUS Satellite Radio by using either satellite or ter-
restrial reception.
• Terrestrial signals are only available in certain areas.
• The SIRIUS information on the Satellite Radio screen
is only displayed when the “SAT Radio Mode” is set
to “SIRIUS” (see page 72).
1
Remote
controller
Press the [Receiver] button, fol-
lowed by the [Tuner] button, and
[Setup] button.
The main menu appears onscreen.
2
Use the Up and Down [q]/[w] but-
tons to select “7. Hardware
Setup”, and then press [Enter].
The “Hardware Setup” menu appears.
Note:
If the “SAT Radio Mode” is set to
“None” (see page 72), the “Antenna
Aiming” item is not available.
Setup
Receiver
qwer
Enter
Tuner
7. Hardware Setup
1. Remote ID
2. Multi Zone
3. Tuner
4. HDMI
5. Network
6. Firmware Update
3
Use the Up and Down [q]/[w] but-
tons to select “3. Tuner”, and
then press [Enter].
The “Tuner” screen appears.
4
Use the Up and Down [q]/[w] but-
tons to select “Antenna Aiming”,
and then press [Enter].
The Satellite Radio screen appears.
The name of the currently selected
input selector is displayed in a box.
5
Position the SiriusConnect Home
antenna so that as many bars as
possible (up to 3) appear on the
SIRIUS Satellite signal strength
meter.
If you cannot receive a satellite signal,
position the SiriusConnect Home
antenna so that as many bars as possible
(up to 3) appear on the SIRIUS Terres-
trial signal strength meter.
7–3. Tuner
FM/AM Frequency Step
SAT Radio Mode
Antenna Aiming
SIRIUS Parental Lock
200kHz/10kHz
SIRIUS
SIRIUS ID
- - - - - - - - - - - -
Satellite Terrestrial
SIRIUS
Antenna Aiming
To Next Page
Loading...
Need help?
General
