48
C H A P T E R 3 Standard Configuration
48
Permanent Entries
Purpose Enables you to allocate a port to a device that does not send out device
information. These devices are not removed from the switch’s ad-
dress table, regardless of how long they are quiet. This is useful for
connections to printers and other similar devices. You can:
• Add a new entry to the list
• Delete an entry
• Edit existing entries
Adding a Permanent Entry To add a device to the switch’s address table:
1 Select Device Setup or Stack Setup.
2 Click Permanent Entries.
3 Click Add.
4 Type the device’s MAC address.
5 Click Port number and select one. A permanent entry is
only made on the defined port.
6 Click OK.
500.book Page 48 Thursday, September 2, 1999 1:30 PM
To Next Page
Loading...
