67
67
C H A P T E R 4 Advanced Configuration
Adding a VLAN
The task of adding VLANs is simplified by using the VLAN Wizard.
VLANs are not switch specific when managing a stack. Therefore,
right-click the stack border to access VLAN Setup. To add a VLAN:
1 Select VLAN Setup.
2 Click Add, and follow the instructions in the Wizard windows.
Deleting a VLAN To delete a VLAN:
1 Select VLAN Setup.
2 Click the name of the VLAN you want to delete. (Note: you
cannot delete a VLAN if it is the
[Designated Manage-
ment VLAN]
. To do this, click another VLAN, click Proper-
ties
and then click Use this VLAN for SNMP
management
; you can now delete the first VLAN.)
3 Click Delete.
Policy Information required
Switch Ports Port numbers
IP Subnet IP Subnet and Mask
Mixed policy IP Subnet and Mask,
Port numbers,
MAC address and/or
IP address
500.book Page 67 Thursday, September 2, 1999 1:30 PM
To Next Page
Loading...
