Intel S2400SC User Manual

Appendix B: Integrated BMC Sensor Tables Intel® Server Board S2400SC TPS
Intel order number G36516-002 Revision 2.0
116
 Rearm Sensors
The rearm is a request for the event status of a sensor to be rechecked and updated
upon a transition between good and bad states. You can rearm the sensors manually or
automatically. This column indicates the type supported by the sensor. The following
abbreviations are used in the comment column to describe a sensor:
- A: Auto-rearm
- M: Manual rearm
 Default Hysteresis
The hysteresis setting applies to all thresholds of the sensor. This column provides the
count of hysteresis for the sensor, which is 1 or 2 (positive or negative hysteresis).
 Criticality
Criticality is a classification of the severity and nature of the condition. It also controls the
behavior of the Control Panel Status LED.
 Standby
Some sensors operate on standby power. You can access these sensors and/or
generate events when the main (system) power is off but AC power is present.

Intel S2400SC Specifications

General

Brand	Intel
Model	S2400SC
Category	Motherboard
Language	English