Appendix D: POST Code Errors Intel® Server Board S2400SC TPS
Intel order number G36516-002 Revision 2.0
DIMM_K3 encountered a Serial Presence Detection (SPD) failure
DIMM_L1 encountered a Serial Presence Detection (SPD) failure
DIMM_L2 encountered a Serial Presence Detection (SPD) failure
DIMM_L3 encountered a Serial Presence Detection (SPD) failure
DIMM_M1 encountered a Serial Presence Detection (SPD) failure
DIMM_M2 encountered a Serial Presence Detection (SPD) failure
DIMM_M3 encountered a Serial Presence Detection (SPD) failure
DIMM_N1 encountered a Serial Presence Detection (SPD) failure
DIMM_N2 encountered a Serial Presence Detection (SPD) failure
DIMM_N3 encountered a Serial Presence Detection (SPD) failure
DIMM_O1 encountered a Serial Presence Detection (SPD) failure
DIMM_O2 encountered a Serial Presence Detection (SPD) failure
DIMM_O3 encountered a Serial Presence Detection (SPD) failure
DIMM_P1 encountered a Serial Presence Detection (SPD) failure
DIMM_P2 encountered a Serial Presence Detection (SPD) failure
DIMM_P3 encountered a Serial Presence Detection (SPD) failure
POST Reclaim of non-critical NVRAM variables
BIOS Settings are corrupted
NVRAM variable space was corrupted and has been reinitialized
Serial port component was not detected
Serial port component encountered a resource conflict error
TPM device missing or not responding.
TPM device failed self test.
PCI component encountered a SERR error
PCI Express component encountered a PERR error
PCI Express component encountered an SERR error
A6A0
DXE Boot Service driver: Not enough memory available to shadow a Legacy
Option ROM
POST Error Beep Codes
The following table lists the POST error beep codes. Prior to system video initialization, the
BIOS uses these beep codes to inform users on error conditions. The beep code is followed by
a user-visible code on the POST Progress LEDs.
Table 55. POST Error Beep Codes
Short beep sounded whenever a USB device is discovered
in POST, or inserted or removed during runtime
violation
System halted because Intel
®
Trusted Execution
Technology detected a potential violation of system
System halted because a fatal error related to the memory
was detected.
Recovery boot has been initiated