10
Preparing for Setup
Your system’s primary system disk drive and any additional disk drives were formatted and
partitioned before shipment. In Explorer or My Computer, you can right-click a disk drive
and click Properties to display the drive’s partition size and file system format. To view
partition and format information for all disk drives, you can use Disk Administrator on a
Windows NT system or the fdisk command on a Windows 95 system. See the operating
system documentation and Help for more information on these tools.
Pre-Installed Software
The operating system and associated system software is pre-installed on the primary hard
disk drive. Intergraph Computer Systems installed the following system software:
u
Driver software for the mouse (Windows 95)
u
Driver software for the installed video display adapter
u
Driver software for the on-board sound adapter
u
Driver software for the installed SCSI adapter (optional)
u
Driver software for the installed networking adapter (optional)
u
Operating system network software (TCP/IP and NetBEUI; optional)
u
InterSite software
Before You Start Setup
Intergraph Computer Systems installs the operating system through Phase I of the process.
You must follow the operating system Setup process to prepare Microsoft Windows NT or
Microsoft Windows 95 for use. Before you go through Setup, have the following documents
available:
u
Microsoft’s Start Here (for Windows NT) or Welcome to Windows 95.
u
Documents delivered with any expansion cards or additional peripheral devices
purchased from Intergraph Computer Systems
Get and record the following information:
u
Your name, and the name of your
company or organization:
To Next Page
Loading...
