18
When the operating system desktop displays, right-click the desktop background and select
Properties. The Display Properties dialog displays. Check for the following common
configuration problems and solutions.
u
A multi-sync monitor is connected to the system, but a multi-sync monitor type is not
selected, and the display driver cannot determine this by querying the monitor. Select
an appropriate multi-sync monitor type.
u
A selected resolution, depth, or refresh rate is not supported by the multi-sync monitor.
Try using different video display settings.
u
The Dual Screen option is selected, but only one video card is detected. Clear the Dual
Screen option.
u
A multi-sync monitor is selected, but a monitor with different video timings is
connected to the system. Select the appropriate monitor type as described previously.
u
The monitor selection doesn’t match the multi-sync monitor attached to the system.
Restart the system in VGA mode, then select a new monitor as described previously.
u
A graphics resolution and color depth has been selected that exceeds installed display
memory. Restart the system in VGA mode, then open Display in the Control Panel to
reinstall and configure the display driver as described in the video display adapter
documentation delivered with the system.
After you’ve configured the video display, restart the system and select the non-VGA version
of the appropriate operating system to use the new configuration.
If problems persist, contact the Customer Response Center for help.
Configuring Audio
The system is equipped with an on-board ESS Maestro-2 PCI sound adapter. If the system
has a multimedia keyboard or a microphone and speakers, you can use the operating
system’s Volume Control program to control them. To access Volume Control, double-click
the speaker icon on the task bar.
You can configure the microphone and speaker audio levels by using the Volume Control
utility, available as a speaker icon on the Taskbar. For more information on using the sound
control programs, see the operating system documentation and Help.
To Next Page
Loading...
