56
System Power
ERROR - Fails to power on.
Reason
Solution
Power cord not connected properly. Verify that the power cord is properly
connected to the power receptacle.
Power not available at the outlet. Verify power to the outlet has not been
interrupted. Test the outlet with a known
working appliance.
Power not available from the UPS. Verify the UPS is connected and operating
properly.
Internal power cables not connected. Open case and ensure all power cables are
connected.
Faulty power cord. Replace power cord.
System Boot
ERROR - Does not boot from drive A.
Reason
Solution
Corrupt BIOS on the flash EPROM. Power off the system and insert a floppy
diskette containing the
AMIBOOT.ROM file
into the floppy disk drive. Depress and
hold
CTRL-HOME while powering up the
system. Release the keys when the drive
LED lights. If the BIOS remains corrupt,
contact the Customer Response Center.
The boot sequence may be set to C, A, in
which case the machine will not boot from A
if there is an operating system on C.
Change the boot sequence. See
Chapter 4.
Corrupt boot disk, or boot disk does not have
correct boot utilities.
Replace the boot disk. See System
Reference.
ERROR - Does not boot from the expected boot device.
Reason
Solution
Operating system not on the system drive. Install the operating system as described in
Chapter 7.
To Next Page
Loading...
